Главная > Новости >

The use method of bending machine

Dec. 12, 2019

The use method of bending machine

1. First, switch on the power supply, open the key switch on the control panel, and then press the oil pump to start.

2, stroke adjustment, the use of the bending machine must pay attention to adjust the stroke, before bending must try.There must be a thick gap between the bending die and the bottom.Otherwise, damage will be caused to the mold and machine.The adjustment of the stroke also has electric quick adjustment and manual fine tuning.

3, bending notch selection, generally to choose the plate thickness of 8 times the width of the notch.If bending 4mm sheet material, you need to choose about 32 slots.

4, the rear block adjustment is generally electric quick adjustment and manual fine-tuning, the same method as the shearing machine.

5, step on the foot switch to start bending, bending machine and shearing machine is different, you can release at any time, release the foot bending machine will stop, and then continue to step down.

Zaozhuang make machinery co., ltd. produces a variety of models of bending machine, hydraulic bending machine, manual bending machine and CNC bending machine we have production, models have HPB -20, HPB -30. HPB-50, HPB -100,ZYB-160T,JGWG-40BZ, welcome new and old customers to choose!

Copyright © ооо финиковое машиностроение Все права защищены | Карта сайта |Питаться от: REANOD

  • wechat

    +86 189 0632 5332: +86 189 0632 5332

  • wechat

    +86 178 6086 6228: +86 178 6086 6228