Главная > Новости >

Structure of radial drilling machine

Feb. 14, 2020

Structure of radial drilling machine

The radial drilling machine is mainly composed of base, inner column, outer column, rocker arm, spindle box and workbench.


The inner column is fixed at one end of the base, and the outer column is sheathed on the outside. The outer column can rotate 360 degrees around the inner column. One end of the rocker arm is a sleeve, which is sleeved on the outer column to move up and down. Since the screw rod is integrated with the outer column, and the lifting nut is fixed on the rocker arm, the rocker arm can not rotate around the outer column, but can only rotate around the inner column together with the outer column.


The spindle box is a composite part, which is composed of main drive motor, main shaft and main shaft drive mechanism, feed and speed change mechanism, machine tool operation mechanism, etc. The headstock is installed on the horizontal guide rail of the rocker arm, which can be operated by the hand wheel to move along the rocker arm on the horizontal guide rail.


The radial drilling machine produced by Zaozhuang Make Machinery Co., Ltd. can meet different needs of customers. Welcome new and old customers to purchase

Copyright © ооо финиковое машиностроение Все права защищены | Карта сайта |Питаться от: REANOD

  • wechat

    +86 189 0632 5332: +86 189 0632 5332

  • wechat

    +86 178 6086 6228: +86 178 6086 6228

Поболтай с нами