Главная > Новости >

Operation problems of gantry milling machine

Jan. 22, 2021

Gantry milling machine operation problems

Zaozhuang Make Machinery Co., Ltd. gantry milling machine is mainly gantry, and the combination of various components, so as to ensure that the milling machine play its due role. Therefore, when operating the gantry milling machine, we need to pay attention to several points to ensure the safety of personnel and equipment.

1. When working, the object should be fixed with screws or other special tools. When using ordinary spanner, it is not allowed to use the sleeve outside, so as to avoid the spanner slipping down and causing injury to people.

2. The cutter of the milling machine should be fixed well. If it is loose, it is forbidden to start the machine.

3. Before running the milling machine, check the running condition of its transmission parts, and start it to work after installing the baffle of the machine.

4. When it is used to mill various workpieces, the workpieces should be cut slowly when it is just started.

5. When changing the position of worktable and tool rest, loosen the screw that plays a role in fixing.

6. In the process of loading and unloading, the cutter can be gently knocked with a copper hammer or wooden mallet to avoid the injury caused by the cutter fragments flying out.

Zaozhuang Make Machinery Co., Ltd. gantry milling machine X2014-20, X2014-30 and other models are on sale, welcome customers to consult!

龙门铣床1.jpg


Copyright © ооо финиковое машиностроение Все права защищены | Карта сайта |Питаться от: REANOD

  • wechat

    +86 189 0632 5332: +86 189 0632 5332

  • wechat

    +86 178 6086 6228: +86 178 6086 6228